Navigation: Home -> Automatic Pick and Place Machines QM3000--New Model
Automatic Pick and Place Machines QM3000--New Model

Automatic Pick and Place Machines

( CE Certified )



The QM3000 is our largest and most sturdiest model since its made out of cast iron. It’s ideal for SMT manufacturing and producing prototypes, this highly flexible pick & place machine can be fitted into a turnkey line by selecting the internal conveyor option. It operates with dual pick and place heads with a 3,500 parts per hour placement rate. It is capable of holding up to 56 of our 8mm pneumatic feeders; will come with a full vision system that consists of one up looking and one down looking camera. (additional up looking camera for larger components is optional) The QM3000 includes a PCB fixture that can be adjusted up to 18"(457mm)×12"(304mm) capable of holding One JEDEC Tray & once PCB.


• 3500 estimated pph(parts per hour) 
• 18"(460mm)×12"(304mm) working area (QM3000) 
• Placement of 0402 standard (upgrade for smaller parts) 
• Computer vision automatic centering system for IC's (SOP, QFP, BGA) and better placement of small parts 
• Fully programmable digital Z-axis and Theta rotation angles 
• X and Y axis 0.0005" resolution, 0.001" positioning, 0.045° rotational resolution 
• 56 feeder capacity-standard for QM3000 
• Automatic PCB board position correction with fiducial recognition included 
• Automatic post-place vision inspection 
• CAD file convert function 
• Gerber file convert function  
• Selective soldering function built in (optional hot air gun mounting adaptor) 
• 12 month full factory warranty - parts & labor 
• Easy to use graphic software for quick programming. Programming can be done with teaching video camera, on screen Gerber file graphics or CAD file 
• 110V AC 60Hz, or 220 V AC, 50Hz, 750 watts electrical 
UL Ready 
• 60 psi shop air required 
• QM3000 900 lbs. net weight 
• 1300mm×1100mm×1300mm
• Machine customization available
• Made in USA


QM3000 Data Sheet













IC Test Video


Options and Feeders:

• Windows XP computer 
• Additional up looking cameras (only fixed lens can be used on the video camera for computer vision. Different cameras should be used for small and big parts for best results. Also working speed can be improved if more cameras are placed at different locations close to feeders)
• Tape feeder carrier, required to use tape feeders  
• Automatic nozzle changer
• Paste dispensing adaptor and control software 
• Hot air rework station mounting adaptor
• Paste dispenser Gerber file translator software from Dockerty Electronics
• Five channel vibratory feeder for tube parts
• 8mm  Feeder: 8x2, 8x4 (paper or plastic)
• 12mm  Feeder: 12x4, 12x8, 12x12
• 16mm  Feeder: 16x8, 16x12
• 24mm Feeder: 24x8, 24x12, 24x16

• 32mm Feeder: 32x12, 32x16, 32x24
• 44mm Feeder: 44x16, 44x24, 44x32
• Low cost manual Feeder